yakuza mazda 929 HC

yakuza
Registered users
Registered users
Posts: 28
Joined: Fri Jan 22, 2010 12:41 am
Make: mazda
Model: 929
Year: 1989
Body Code: hc

yakuza mazda 929 HC

Post by yakuza » Wed Jan 27, 2010 6:22 am

gidday guys.
this is my 1989 HC 929 series 2. ive owned it for about six years now and just slowly bought and fitted things here and there to it in the mean time. like most people i bought this to be a practical cruiser and keep it relatively stock, but i really was kidding myself. lol.

Image

Image

exterior mods:
-jap spec HCFS front bumper bar
-lowenhart ld-1 18X9 +45 wheels (30mm spacers rear & 10mm spacers front)
-Aurora 3 inch lowered springs.
-2.5" exhaust system with vip style rear muffler
- debadged & boot keyhole removed and filled.
-KDM front & rear Strut braces
-Ebay bonnet mascot

interior mods:
-Junction Produce fusa
-Alpine mp3 head unit
-Alpine V12 Mrd-m350 monoblock amp
-Alpine type R 12" sub
-Alpine type X 6.5" splits
-Alpine type S 6x9's


anyway i think thats about it. ive dont heaps more other things but they arent really as important or brag worthy.

my current plans are to address my wheel fitment as i think its still lacking a bit in achieving a half decent vip-style stance. im hoping to get a camber kit from the US to hopefully get rid of the very gay positive camber up front. if the camber is decent ill then switch the 30mm spacers that are on the rear and chuckl em up front and then get some 40mm ones to put on the back after a guard roll.
i'd also like to look into switching my suspension over to FC rx-7 coilovers to get the car just that little bit lower.
JAY-929
Global Moderator
Global Moderator
Posts: 264
Joined: Tue Nov 03, 2009 10:22 pm
Make: Mazda
Model: 929
Year: 1988
Body Code: HC01
Location: Melbourne, Victoria, AU

Re: yakuza mazda 929 HC

Post by JAY-929 » Wed Jan 27, 2010 6:39 am

NICE! About time this come up over here in Projects :P

Got any shots of the boot install? (or is it a "ghetto" install? haha)
Close up of the bonnet badge?
1988 MAZDA 929 HC SERIES 1 HARDTOP
CURRENTLY UNDER CONSTRUCTION
Matsuda9
Site Admin
Site Admin
Posts: 612
Joined: Thu Jun 18, 2009 11:09 am
Make: Mazda
Model: Luce
Year: 1988
Body Code: HCFS
Location: Melbourne, AU
Contact:

Re: yakuza mazda 929 HC

Post by Matsuda9 » Wed Jan 27, 2010 10:04 am

this car is brilliant, regardless that i am more of GT look over VIP, but your car is..... yummy :)
Image
yakuza
Registered users
Registered users
Posts: 28
Joined: Fri Jan 22, 2010 12:41 am
Make: mazda
Model: 929
Year: 1989
Body Code: hc

yakuza mazda 929 HC

Post by yakuza » Wed Feb 03, 2010 2:09 pm

cheers for the comments fellas.
jay- i wouldnt say its a ghetto boot install but its nothing overly special really. just the sub in the boot in a custom ported box and the amp mounted in the cabin behind the rear seats.

matsuda- thanks man. yeh i love the gt look of the luce's too, but the calling of vip styling was far stronger. whenever im in melbourne or sydney i always grab the jap vip car mags from the japanese magazine stores and i just look at the pictures for hours. (since i cant read japanese lol)
yakuza
Registered users
Registered users
Posts: 28
Joined: Fri Jan 22, 2010 12:41 am
Make: mazda
Model: 929
Year: 1989
Body Code: hc

yakuza mazda 929 HC

Post by yakuza » Wed Feb 03, 2010 2:12 pm

some pics of the stereo install. excuse the dirty boot it needs to be vacuumed.

Image
Image
2jz929
Registered users
Registered users
Posts: 28
Joined: Thu Jun 18, 2009 6:17 am

Re: yakuza mazda 929 HC

Post by 2jz929 » Thu Feb 04, 2010 6:14 am

Awesome looking nine. How much room to you have on the inside with the 9" rim on the rear? Clearance from rim to strut?

Im looking to get some steel rims made for the rear and not sure whether to go with a 8" or 9". Im thinking 8" would be more comfortable with a wide tyre?

I found this when trying on supra wheels. Perfect offset for our cars seems to be around the +20. (Early falcon).
1990 HC Hardtop
JAY-929
Global Moderator
Global Moderator
Posts: 264
Joined: Tue Nov 03, 2009 10:22 pm
Make: Mazda
Model: 929
Year: 1988
Body Code: HC01
Location: Melbourne, Victoria, AU

Re: yakuza mazda 929 HC

Post by JAY-929 » Thu Feb 04, 2010 6:33 am

Nice work on the boot :)

Clean and simple.
1988 MAZDA 929 HC SERIES 1 HARDTOP
CURRENTLY UNDER CONSTRUCTION
jitb
Site Admin
Site Admin
Posts: 167
Joined: Wed Jun 17, 2009 9:01 pm
Location: Atlanta, GA USA
Contact:

Re: yakuza mazda 929 HC

Post by jitb » Mon Feb 08, 2010 7:45 am

nice car ive seen it alot on the net!
Image
yakuza
Registered users
Registered users
Posts: 28
Joined: Fri Jan 22, 2010 12:41 am
Make: mazda
Model: 929
Year: 1989
Body Code: hc

Re: yakuza mazda 929 HC

Post by yakuza » Thu Apr 01, 2010 12:55 am

had a bit of a setback at the moment. had one of my rear tyres blowout coz of the negative camber i run in the back (i think its about 4 degrees). then i was checking the tightness of my wheels on my bolt on spacers in the back and sorta overtightened them and snapped a couple of the studs. lol.
so now im driving on stockies all round right now with very sunken offsets. gayyyyy.

on a plus note tho i finally adressed the positive camber issue up front. i bought one of the new monroe "magic" camber bolt kits. it gives up to 3 degrees of adjustment which aint too bad. so now im just in the negative camber region in the front now by about 1 degree. its not much but it'll do for now.
ill post some pics up once i find my battery charger.
2jz929 wrote:Awesome looking nine. How much room to you have on the inside with the 9" rim on the rear? Clearance from rim to strut?

Im looking to get some steel rims made for the rear and not sure whether to go with a 8" or 9". Im thinking 8" would be more comfortable with a wide tyre?

I found this when trying on supra wheels. Perfect offset for our cars seems to be around the +20. (Early falcon).
cheers mate. yeah theres a fair bit of room in the back between the strut and the wheels. you could pretty comfortably fit 10" wide wheels if you wanted to. its the front wheels that are the problem area coz the spring pan sits so close to the wheels.
JAY-929
Global Moderator
Global Moderator
Posts: 264
Joined: Tue Nov 03, 2009 10:22 pm
Make: Mazda
Model: 929
Year: 1988
Body Code: HC01
Location: Melbourne, Victoria, AU

Re: yakuza mazda 929 HC

Post by JAY-929 » Fri Apr 02, 2010 12:41 am

yakuza wrote:had a bit of a setback at the moment. had one of my rear tyres blowout coz of the negative camber i run in the back (i think its about 4 degrees). then i was checking the tightness of my wheels on my bolt on spacers in the back and sorta overtightened them and snapped a couple of the studs. lol.
so now im driving on stockies all round right now with very sunken offsets. gayyyyy.
THAT is shattering! Back on stockies! :P I feel for you... as I'm STILL stuck with stockies! hahaha
1988 MAZDA 929 HC SERIES 1 HARDTOP
CURRENTLY UNDER CONSTRUCTION
Post Reply