Any hints before I start this tomorrow?
The shelf looks complicated. Does the whole shelf need to come out or will the grill come out without pulling the shelf out?
Cheers.
Removing 6x9s on HD Rear Shelf
-
- Registered users
- Posts: 19
- Joined: Mon Jun 14, 2010 4:03 am
- Make: Mazda
- Model: 929
- Year: 1992
- Body Code: HD
-
- Site Admin
- Posts: 612
- Joined: Thu Jun 18, 2009 11:09 am
- Make: Mazda
- Model: Luce
- Year: 1988
- Body Code: HCFS
- Location: Melbourne, AU
- Contact:
Re: Removing 6x9s on HD Rear Shelf
i'm little help with HD but with HC, you will have to take the rear seat back out then undo the plastic clips holding the shelf and then sliding it out towards the front.
but i would try to do the grills first... you might have an easy way compared to HC
but i would try to do the grills first... you might have an easy way compared to HC
-
- Registered users
- Posts: 30
- Joined: Thu Feb 04, 2010 3:10 pm
- Make: Mazda
- Model: 929
- Year: 1995
- Body Code: HD
- Location: Perth, Western Australia
Re: Removing 6x9s on HD Rear Shelf
I'm pretty sure the grills will come out with no dramas. I remember mine became cracked one day and a month later it just fell off on its own lol.
-
- Registered users
- Posts: 19
- Joined: Mon Jun 14, 2010 4:03 am
- Make: Mazda
- Model: 929
- Year: 1992
- Body Code: HD
Re: Removing 6x9s on HD Rear Shelf
Learnt the hardway. The grills are screwed into the shelf, so shelf has to come out first....
Hopefully I can make some aftermarket grills match well enough to not stand out to much.
Hopefully I can make some aftermarket grills match well enough to not stand out to much.