Removing 6x9s on HD Rear Shelf

Post Reply
KillSwitch
Registered users
Registered users
Posts: 19
Joined: Mon Jun 14, 2010 4:03 am
Make: Mazda
Model: 929
Year: 1992
Body Code: HD

Removing 6x9s on HD Rear Shelf

Post by KillSwitch » Fri Jul 09, 2010 5:33 pm

Any hints before I start this tomorrow? :)

The shelf looks complicated. Does the whole shelf need to come out or will the grill come out without pulling the shelf out?

Cheers.
Matsuda9
Site Admin
Site Admin
Posts: 612
Joined: Thu Jun 18, 2009 11:09 am
Make: Mazda
Model: Luce
Year: 1988
Body Code: HCFS
Location: Melbourne, AU
Contact:

Re: Removing 6x9s on HD Rear Shelf

Post by Matsuda9 » Fri Jul 09, 2010 10:25 pm

i'm little help with HD but with HC, you will have to take the rear seat back out then undo the plastic clips holding the shelf and then sliding it out towards the front.

but i would try to do the grills first... you might have an easy way compared to HC ;)
Image
ny4n
Registered users
Registered users
Posts: 30
Joined: Thu Feb 04, 2010 3:10 pm
Make: Mazda
Model: 929
Year: 1995
Body Code: HD
Location: Perth, Western Australia

Re: Removing 6x9s on HD Rear Shelf

Post by ny4n » Sat Jul 10, 2010 6:50 am

I'm pretty sure the grills will come out with no dramas. I remember mine became cracked one day and a month later it just fell off on its own lol.
KillSwitch
Registered users
Registered users
Posts: 19
Joined: Mon Jun 14, 2010 4:03 am
Make: Mazda
Model: 929
Year: 1992
Body Code: HD

Re: Removing 6x9s on HD Rear Shelf

Post by KillSwitch » Sat Jul 10, 2010 9:16 am

Learnt the hardway. The grills are screwed into the shelf, so shelf has to come out first....

Hopefully I can make some aftermarket grills match well enough to not stand out to much.
Post Reply