Re: HC S1 929 Audio Project
Posted: Sun May 23, 2010 12:43 am
Now..... I'll take out the carpet and crap from the boot and mark out my main boot base.
![Image](http://img208.imageshack.us/img208/3318/photo0733.jpg)
![Image](http://img42.imageshack.us/img42/2876/photo0735w.jpg)
![Image](http://img39.imageshack.us/img39/4263/photo0734.jpg)
I'm using 2 x sheets of 1800x600mm 12mm board; as it's very installer-friendly. It can allow me to only modify a smaller piece at a time and fitting is half the hassle. If a piece doesn't fit, the other half doesn't need to come out What I'm doing below is just closing the gaps by screwing the second screw in on an angle![Smile :)](./images/smilies/have%20a%20nice%20day%20copy.png)
![Image](http://img232.imageshack.us/img232/8360/photo0736.jpg)
![Image](http://img11.imageshack.us/img11/1747/photo0737g.jpg)
OK... it's ready to mark up.
![Image](http://img6.imageshack.us/img6/2605/photo0738x.jpg)
![Image](http://img163.imageshack.us/img163/1797/photo0739f.jpg)
![Image](http://img256.imageshack.us/img256/4289/photo0740o.jpg)
I will have to allow for a side compartment for the car jack on the RHS of the boot.
![Image](http://img576.imageshack.us/img576/6778/photo0742.jpg)
![Image](http://img62.imageshack.us/img62/5757/photo0743.jpg)
![Image](http://img686.imageshack.us/img686/7949/photo0744m.jpg)
Just about ready to cut now![Smile :)](./images/smilies/have%20a%20nice%20day%20copy.png)
![Image](http://img208.imageshack.us/img208/3318/photo0733.jpg)
![Image](http://img42.imageshack.us/img42/2876/photo0735w.jpg)
![Image](http://img39.imageshack.us/img39/4263/photo0734.jpg)
I'm using 2 x sheets of 1800x600mm 12mm board; as it's very installer-friendly. It can allow me to only modify a smaller piece at a time and fitting is half the hassle. If a piece doesn't fit, the other half doesn't need to come out What I'm doing below is just closing the gaps by screwing the second screw in on an angle
![Smile :)](./images/smilies/have%20a%20nice%20day%20copy.png)
![Image](http://img232.imageshack.us/img232/8360/photo0736.jpg)
![Image](http://img11.imageshack.us/img11/1747/photo0737g.jpg)
OK... it's ready to mark up.
![Image](http://img6.imageshack.us/img6/2605/photo0738x.jpg)
![Image](http://img163.imageshack.us/img163/1797/photo0739f.jpg)
![Image](http://img256.imageshack.us/img256/4289/photo0740o.jpg)
I will have to allow for a side compartment for the car jack on the RHS of the boot.
![Image](http://img576.imageshack.us/img576/6778/photo0742.jpg)
![Image](http://img62.imageshack.us/img62/5757/photo0743.jpg)
![Image](http://img686.imageshack.us/img686/7949/photo0744m.jpg)
Just about ready to cut now
![Smile :)](./images/smilies/have%20a%20nice%20day%20copy.png)