no spark from coil
Posted: Fri May 22, 2015 11:13 pm
I have 89 Mazda 929 that I van not get the coil to send spark to the distributor. Have replaced the coil. Will the igniter cause the coil not to send fire to the plugs?
Page 1 of 1
Re: no spark from coil
Posted: Sat May 23, 2015 12:32 am
Yes it can, but also i would check wiring and connector plugs, lack of signal could have an effect as well.
Re: no spark from coil
Posted: Mon May 25, 2015 11:01 pm
I have checked all the connectors at the coil and the igniter. Have voltage at one plug on the coil and voltage at two plugs on the igniter. Now where can I go to figure out why I'm not getting fire from the coil. 
Re: no spark from coil
Posted: Mon May 25, 2015 11:03 pm
Sorry about that advartar I used lol
Re: no spark from coil
Posted: Thu May 28, 2015 4:01 pm
I still need as much help as I can get on this car Thank you
Re: no spark from coil
Posted: Fri May 29, 2015 11:59 am
How is your dizzy? if the voltages where they supposed to be, so is coil send the spark to the dizzy?
i am wondering and it might be farfetched, but it could be crank angle sensor that is in the dizzy, is your timing belt fine?
i am wondering and it might be farfetched, but it could be crank angle sensor that is in the dizzy, is your timing belt fine?